Connecting Power; Connecting A Cable Or Satellite Box - Insignia NS-19E720A12 User Manual

Insignia 15"/19"/22"/24" LED-LCD TV

Connecting power

To connect the power:
• Plug the AC power cord into a power outlet.
Cautions
• Your TV should only be operated from the
power source indicated on the label.
• Always unplug the AC power cord from the
power outlet when you will not be using your
TV for an extended period of time.
• The AC power cord is permanently attached to
the back of your TV. Do not try to pull it out.

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available. For
more information, see "What connection should I
use?" on page 12.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI cable (not included) to one of
the HDMI jacks on your TV and to the HDMI jack
on the cable or satellite box.
15-inch and 19-inch models
HDMI cable
Cable or satellite box
4 Plug your TV's power cord into a power outlet,
5 Go through the Setup Wizard on page 28.
www.insigniaproducts.com
22-inch and 24-inch models
HDMI cable
Cable or satellite box
You can also use the HDMI 1
jack on the back of your TV.
turn on your TV, then turn on the cable or
satellite box.
Note
An HDMI cable carries both audio and video. You do
not need to use any audio cables.
13