Connecting Your Devices - Dukane ImagePro 8912H User Manual

Connecting your devices

Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect. Please refer to the following illustrations
to connect them.
RS-232C
Y C /P C /P
B B R
COMPONENT VIDEO OUT
WARNING ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about non-
accessory cables which may be required a specific length or a ferrite core by
the regulations. For cables with a core only at one end, connect the end with
the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
4
PC
RGB OUT USB
L R VIDEO OUT
R
AUDO IN OUT
RGB OUT
AUDIO OUT
L R L R
S-VIDEO OUT
AUDO IN OUT AUDO IN OUT
AUDIO OUT
Monitor
RGB IN
AUDIO IN
VCR/DVD
player
Speakers
(with an
amplifier)