Dukane 8755E-RJ User Manual page 105

Date/Time Settings (Continued)
Item
Daylight Savings Time
Start
Month
Week
Day
Hour
Minute
End
Month
Week
Day
Hour
Minute
Time difference
SNTP
SNTP Server IP Address Configures the SNTP server address in IP format.
Cycle
Click the [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the network connection.
The network connection must be restarted when the configuration settings are changed, The
network connection can be restarted using [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• To enable the SNTP function, the time difference must be set.
• The projector will retrieve DATE and TIME information from the Timeserver
and override time settings when SNTP is enabled.
• The Internal Clock's time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
Click the [ON] check box to enable daylight savings time and
set the following items.
Configures the date and time daylight savings time begins.
Configures the month daylight savings time begins (1~12).
Configures the week of the month daylight savings time
begins (First, 2, 3, 4, Last).
Configures the day of the week daylight savings time begins
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Configures the hour daylight savings time begins (0 ~ 23).
Configures the minute daylight savings time begins (0 ~ 59).
Configures the date and time daylight savings time ends.
Configures the month daylight savings time ends (1 ~ 12).
Configures the week of the month daylight savings time ends
(First, 2, 3, 4, Last).
Configures the day of the week daylight savings time ends
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Configures the hour daylight savings time ends (0 ~ 23).
Configures the minute daylight savings time ends (0 ~ 59).
Configures the time difference (hours:minutes).
Set the same time difference as the one set on your PC. If
unsure, consult your network administrator.
Click the [ON] check box to retrieve Date and Time
information from the SNTP server and set the following items.
Configures the interval at which to retrieve Date and Time
information from the SNTP server. (hours:minutes).
Description
Settings
19