Table of Contents
Advertisement
I
N
S
T
A
L
L
A
I
N
S
T
A
L
L
A
Cabling
Refer to the table below for connecting each terminal of the projector to a device.
Table 2. Cabling
Function
Analog RGB input
RS-232C communication
Audio input
(from the computer)
Component video input
S-video input
Video input
Audio input
(from video equipment)
CAUTION • Incorrect connecting could result in fire or electrical shock.
Please read this manual and the separate "SAFETY INSTRUCTIONS".
• Before connecting, turn off to all devices to be connected, except for the USB
cable.
• The cables may have to be used with the core set to the projector side. Use the
cables which are included with the projector or specified.
NOTE
• Before connecting, read instruction manuals of the devices to be connected, and make sure that the
projector is compatible with the device.
• Secure the screws on the connectors and tighten.
• For some RGB input modes, the optional Mac adapter is necessary.
• To select the digital RGB input, the comuter may need some settings. See the manuals of the computer for
details.
• Some computers may have multiple display screen modes. Use of some of these modes will not be possible
with this projector.
• Refer to the "TECHNICAL" section for the pin assign ment of connectors.
• Refer to manual of the optional RS-232C cable, for the communication data.
• For others, consult your dealer.
ENGLISH-6
T
I
O
N
(
c
o
T
I
O
N
(
c
o
Terminal
RGB
CONTROL
AUDIO
COMPONENT VIDEO Y
COMPONENT VIDEO C
/P
B
B
COMPONENT VIDEO C
/P
R
R
S-VIDEO
VIDEO
AUDIO L
AUDIO R
n
t
i
n
u
e
d
)
n
t
i
n
u
e
d
)
Cable
Accessory RGB cable or optional RGB
cable with D-sub 15-pin shrink jack and
inch thread screws
Optional RS-232C cable
Optional audio cable with stereo mini jack
Accessory component video cable
Optional S-video cable with mini DIN 4-pin
jack
Optional video/audio cable with RCA jack
Advertisement
Table of Contents
