Turning On The Power - Dukane 28A8049A User Manual

TURNING ON THE POWER

Precautions
Connect all devices to be used to the projector prior to turning on the power.
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
VIDEO RGB SEARCH
ASPECT AUTO
MAGNIFY HOME PAGE UP
ON
END PAGE DOWN
OFF
FREEZE
Control panel
STANDBY/ON INPUT KEYSTONE RESET
NOTE
Turn the
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
• Power off the
projector after the
computer or video
tape recorder.
14
Make sure that the power cord is firmly and
1
correctly connected to the projector and outlet
STANDBY/ON
BLANK
VOLUME
Turn on the projector's power
2
MUTE
Set the power switch to [ | ] (ON). The projector will go
to STANDBY mode and the POWER indicator will light to
KEYSTONE
solid orange.
LANP
TENP
POWER
Press the STANDBY/ON button (control
3
panel or remote control)
• The projector begins warming up and the POWER
• The POWER indicator stops blinking
Remove the lens cap
4
The picture is projected.
3
POWER indicator
indicator blinks green.
and lights to solid green once the
projector's power is completely on.
∼
8 12
power switch
STANDBY/ON