Lexmark Color Laser Administrator's Manual page 7

Using a network license
Copying the license file to the Lexmark License Server
Note: Before installing a network license, copy the license files to the license server.
1
Copy the license file to the following directory on the network license server:
C:\Program Files\Lexmark\LicenseServer\Licenses
2
On the host computer, open the Control Panel.
3
Under Administrative Tools, click Services.
4
Select License Server.
5
Stop and then restart the License Server service.
Configuring the network license
1
From the Embedded Web Server, do one of the following:
•
Click Settings > Device Solutions >Embedded Solutions.
•
Click Settings or Configuration >Embedded Solutions.
2
Click Network License.
3
Enter the IP address or hostname and optional port for the network license server where the license is stored. You
can enter values for up to three separate servers.
4
Specify the Heartbeat Period (2–60 minutes), to designate how often the printer will contact the network license
server to check for updates and maintain access to an electronic license.
5
Specify the Number of Retries (1–5), to set the maximum number of times the printer can attempt to obtain a
license before quitting.
6
Click Apply.
Updating the network license
1
From the Embedded Web Server, do one of the following:
• Click Settings > Device Solutions >Embedded Solutions.
•
Click Settings or Configuration >Embedded Solutions.
2
Under Installed Solutions, click the name of the application you are licensing.
3
Click License.
4
Click Update License.
5
Select Network.
6
Click Update License.
Configuring the application
7