Table of Contents
Advertisement
10
English
Adjusting the Image Size
Positioning the projection display
Projection
Distance
Image Size
(diagonal)
Slide the lens latch and pop up the projection lens. Switch on the power and
press the "Power on/Standby" button. See "Powering On/Off the Projection
Display" on page 9 for more information.
Adjusting the screen image.
1. Rotate the projection lens to focus the image.
2. Slide the keystone correction button to adjust image shape.
3. Adjust the elevation:
(1) Pull out the carrying handle.
(2) Lift the projection display to the desired angle.
(3) Press down on the elevator node to loosen the elevator foot.
5 ft.
(1.5 m)
40"
(1.01m)
(min.)
(projection distance and image size)
Power on/
Standby Buttons
Lens Latch
Keystone Correction
Carrying Handle
6.5 ft.
9.5 ft.
13 ft.
(2 m)
(3 m)
(4 m)
60"
80"
110"
(1.52m)
(2.03m)
(2.79m)
Elevator Node
20 ft.
(6 m)
160"
(4.06m)
(max.)
Power Switch
Lens
Advertisement
Table of Contents
