Network Setting - D-Link DSN-6020 User Manual

Figure 4.2.1.1
Check "Change date and time" to set up the current date, time, and time zone before
using or synchronize time from NTP (Network Time Protocol) server. Click "Confirm" in
System indication to turn on the system indication LED. Click again to turn off.
4.2.2

Network setting

"Network setting" is for changing IP address for remote administration usage. There
are 3 options, DHCP (Get IP address from DHCP server), BOOTP (Get IP address from
BOOTP server) and static IP. The default setting is DHCP. User can change the HTTP,
HTTPS, and SSH port number when the default port number is not allowed on host/server.
40