Clp-S406 Assembly - Yamaha 440 Owner's Manual

CLP-S406 Assembly

Remove all parts from the package and make sure you have all of the items.
Connector
panel
Foamed styrol pads
Remove foamed styrol pads from the package, position them on
the floor, then place A on top of them.
Position the pads so that they will not hide the connector panel
on the bottom of A.
NOTICE
Please keep the protective sheet for later use. It will be used to
protect the keyboard from being scratched when the instrument
is transported. The protective sheet should be spread over the
entire keyboard before closing the key cover.
E
Appendix
80
Assembling the Clavinova
A
B
C
A bundled pedal cord is attached to the reverse side.
D
G
Protective sheet
F
Assembly parts
6 x 25 mm long screws x 6
4 x 16 mm thin screws x 11
6 x 16 mm short screws x 6
Cord holders x 2
Headphone hanger
4 x 10 mm thin screws x 2
Headphone hanger
Power cord