Asus CUW-B User Manual page 42

3. HARDWARE SETUP
29) AT Power Supply Connector (12-pin block PS2)
This connector connects to a standard 5 Volt power supply. To connect the
leads from the power supply, ensure first that the power supply is not plugged.
Most power supplies provide two plugs (P8 and P9), each containing six wires,
two of which are black. Orient the connectors so that the black wires are to-
gether.
®
CUW-B
CUW-B AT Power Connector
At a slight angle, align the plastic guide pins on the lead to their receptacles on
the connector. Once aligned, press the lead onto the connector until the lead
locks into place.
30) Thermal Sensor Connector (2-pin JTPWR)
If you have a power supply with thermal monitoring, connect its thermal sensor
cable to this connector.
®
CUW-B
CUW-B Thermal Sensor Connector
42
Power Connector
on Motherboard
JTPWR
Power Supply Thermal Sensor
ASUS CUW-B User's Manual
Power Plugs from
Power Supply