System Setup Menu; Anti-Theft Code - Dual XDVD8181 Installation & Owner's Manual

XDVD8181
System GENERAL Setup Menu
General Setup Menu
Default anti-theft password
Settings Default
Radio
Clock adjust
Clock Mode
Camera Image Normal
Video Format
TFT Auto Open
Antitheft code
Antitheft Active
Load Factory
Defaults
NOTE: Not all GENERAL setup features are described in detail
0
OPERATION
• Press the GENERAL button to access the setup mode
• Select desired parameter you wish to change
• Page will return back to previous screen after 10 secs of inactivity or by
NOTE:
pressing the RETURN button
is 0000 This is matrix of the GENERAL Setup Menu
Options
USA
S-AMER1
USA
S-AMER
Europe
AM 00:00
1Hr 1Hr
4Hr
Normal
Reverse
AUTO
Auto
NTSC
PAL
On
Off
Off
Manual
0000 ----
Off On
Off
Yes Are you
sure? Yes /
Cancel
Set to appropriate setting for your Country
See adjusting the clock for more details
PM 6:00
18:00
Normal Image
Mirror camera input image 180 degrees
System will auto detect NTSC or PAL
For NTSC compatibility
For PAL compatibility
TFT panel will automatically open when IGN is turned on
TFT willl remain closed until the OPEN button is pressed
Will only close when OPEN
Must enter password to turn antitheft on or off
System will require a password if main battery power is
removed for more than 5 minutes
No Password will be required if power is removed
Load all factory parameters to their original settlings,
NOTE: this will not change ANTI-THEFT password
Function