Motorola DROID RAZR M User Manual page 54

Droid razr m - user guide
Hide thumbs Also See for DROID RAZR M:
Table of Contents

Advertisement

Connect & transfer
Connect & transfer
Quick start: Connect & transfer
Bluetooth® wireless
Wi-Fi Networks
USB cables
Memory card & file management
Share your data connection
Data use
Share with NFC
Your cloud
Smartphone & tablet
DLNA™ media devices
Virtual Private Networks (VPN)
Mobile network
Airplane mode
Menu
More
Next
Back
Remove or erase a memory card
Note: Do not remove a microSD memory card while your
smartphone is using it or writing files on it.
Before you remove a microSD card you need to unmount
Settings
Storage
it. Tap Apps
>
>
Unmount SD card
>
.
To erase a microSD card, tap Apps
Storage
Erase SD card
>
>
.
Warning: All data on the microSD card will be deleted.
USB connection
You can connect your smartphone to a computer with a
USB cable.
Note: The first time you use a USB connection, your
computer may indicate that drivers are being installed.
Follow any prompts you see to complete the installation.
This may take a few minutes.
1
With the home screen showing, connect a Motorola
micro USB data cable from your smartphone's micro
USB port to a USB port on your computer. Your
smartphone should show
in the status bar.
Note: Make sure to connect the smartphone to a high
power USB port. Typically, these are located directly on
your computer. To change the type of USB connection
if necessary, tap Apps
>
USB computer connection
> Menu
>
2
Your smartphone and microSD memory card appear as
two separate removable disks on your computer.
Drag and drop files between your computer and the
smartphone or microSD card folders. When you're
done, use "Safely Remove Hardware" before
disconnecting the USB cable.
Note: You can't use files on the microSD card while your
Settings
>
smartphone is connected to the computer.
Share your data connection
Your computer can access the internet through your
smartphone's mobile network—you just need a USB
cable.
Tip: To share a Wi-Fi connection, see "Wi-Fi hotspot".
1
Connect your smartphone to your computer using a
USB cable.
Note: If your computer is running something older
than Microsoft™ Windows™ 7 or
Apple™ Macintosh™ OSX, it might require special
configuration.
2
On your smartphone, tap Apps
make sure the
Settings
3
In
USB tethering
Settings
Storage
>
To stop the connection, uncheck
Mass Storage
>
.
disconnect your smartphone from your computer.
Settings
>
Wi-Fi
switch is set to
.
OFF
Tethering & Mobile Hotspot
, tap
, then check
to start the connection.
USB tethering
, then
, then

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xt907

Table of Contents