Nokia 6255i - Cell Phone - CDMA2000 1X User Manual page 71

Note: Contact your calling
card company for more
information.
Save information
1. At the standby mode screen,
select Menu >
settings > Calling
2. Enter your security code, and
press OK. See "Security settings",
67 for more information.
3. Scroll to one of the four card
memory locations, and select
Options > Edit
sequence.
4. Select one of the following
sequence types:
Access no.+ phone no.+ card
no.—Dial access number, phone
number, then card number (+ PIN
if required)
Access no.+ card no.+ phone
no.—Dial access number, card
number (+ PIN if required), then
phone number
Prefix+ phone no.+ card
Dial the prefix (numbers that
must precede the phone number)
and phone number you want to
dial, then card number (+ PIN if
required)
5. Enter the required information
(access number or prefix and card
number), and press
your entries.
Settings > Call
card.
> OK > Dialling
no.—
OK to confirm
Copyright © 2005 Nokia. All rights reserved.
S e t t i n g s ( M e n u 7 )
6. Select Card name.
7. Enter the card name, and press
OK.
Make calls
After you have saved your calling
card information in your phone, you
can make a call using your calling
card.
1. At the standby mode screen,
select Menu >
settings > Calling
2. Enter your security code, and
press OK. See "Security settings",
67 for more information.
3. Scroll to the calling card of your
choice, select Options
OK.
4. Press the End key to return to the
standby mode screen; then enter
the phone number, including any
prefix (such as 0 or 1) that your
calling card may require when
you make a calling card call.
See your calling card for
instructions.
5. Press and hold the Talk key for a
few seconds until
displayed.
6. When you hear the tone or
system message, press OK.
Settings > Call
card.
> Select >
Card call is
61