Nokia 6162 - Cell Phone - AMPS User Manual page 77

Software and pc/pda connectivity guide
Hide thumbs Also See for 6162 - Cell Phone - AMPS:
Table of Contents

Advertisement

DLR-3P
cable
Note: Macintosh PalmOS device users do not need to use the
RS232 - DB9 adapter.
Important: If you are unable to order the RS-232C serial cable as
an accessory, you may be able to purchase a USB-to-RS-232C
adapter. This device may be available at your local computer retailer,
or via the Internet. Or you may consider using IR as your connection
method.
IR (infrared) connection
Your PalmOS device should be equipped with an infrared port. You may
find it more convenient to connect your phone and PalmOS device using
IR, especially if you prefer to leave your serial cable or docking cradle
attached to your PC.
Before dialing, make sure you enable infrared communications on your
PalmOS device, then align the IR ports of the two devices. The preferable
distance between the two devices in an infrared connection is a range of
three inches to three feet maximum. There must be no obstructions
between the two devices and the IR ports of the two devices have to be
pointing at each other.
Your Nokia phone is a Class 1 Laser Product.
DAN-1
null modem adapter
[ 71 ]
PalmOS configuration
Palm
device's
cable
9

Advertisement

Table of Contents
loading

Table of Contents