Table of Contents
Advertisement
To place a call using Contacts Match Abbreviated Dialing:
1.
Enter the last three to six digits of a Contacts entry's
phone number.
2.
Press
your Contacts, the Abbrev. Dial list is displayed.
3.
Select the name you want to call from the list, and then
press
Note:
When Contacts Match is set to On and a number is saved in your
Contacts (regardless of whether Prepend is set to On or Off ), you
can display the number by entering its last three to six digits.
To place a call using Prepend Abbreviated Dialing:
1.
Enter the last four or five digits of the number.
2.
Press
Note:
When Prepend is set to On and Contacts Match is set to Off ,you can
display the 10-digit number (including the predefined prepend
number) by entering the last four or five digits of the number.
Note:
The Prepend feature is available when all of following
conditions are met:
• Prepend is set to On .
• A prepend number has been predefined.
•The combined total (prepend number plus the digits you
enter) is 10 digits.
When both Contacts Match and Prepend are set to On and a
number is not saved in your Contacts, you can display the 10-
digit number (including the five- or six-digit prepend number)
by entering the last four or five digits of the number.
Tip:
You can also place a call by selecting Options (right softkey) >
Abbrev. Dial after step 1 above for either Contacts Match
Abbreviated Dialing or Prepend Abbreviated Dialing.
. If there is more than one matched number in
to place a call.
.
Section 2A: Phone Basics
41
Advertisement
Table of Contents
