Measure Lap Time; Save The Lap Time; Operation Note; Options - Nokia 6015i - Cell Phone - CDMA User Manual

Measure lap time

You can use the lap time function
when you want to track how long it
takes to complete each cycle or lap.
1. In the standby mode, select
> Organiser > Stopwatch
timing > Start.
2. Press Lap to note the lap time.
The clock stops, then starts
immediately from zero. The lap
time appears below the running
time. If you take more than one
lap time, the new measured time
appears at the beginning of the
list. You can scroll to see previous
measured times. When you press
Stop, the total time appears at
the top.

Save the lap time

1. While the clock is running, select
Stop >

Options

2. Enter a name for the
measurement, and press OK.
If you do not enter a name, the
total time is used as the default
title for the lap time.
Menu
> Lap
> Save.
Copyright © 2004 Nokia. All rights reserved.
O r g a n i s e r ( M e n u 9 )

Operation note

If you press the End key and return
to the standby mode screen, the
clock continues to run in the
background and the
appears in the upper left corner of
the screen.
To return to the stopwatch screens:
1. In the standby mode, select
> Organiser > Stopwatch
>Continue.
2. To stop the clock, press Stop.
Options
You can choose the following
options when using the stopwatch:
Continue—Shows up when the
stopwatch is working in the
background.
Show last time—Allows you to view
the last measured time.
View times—Allows you to browse
the saved times.
Delete times—Allows you to delete
any saved times. You can delete the
saved times one by one or all at
once.
icon
Menu
63