Drolet ECO-65 Owner's Manual page 30

7. Install 4 x ½ inch pieces of #40018 adhesive gasket aligned with each retainer tab to keep the
appropriate gap between the glass and the door frame.
8. Install the glass in the door frame making sure it is centered.
9. Set the torx of the power driver at 1/3 of its capacity. Install the retainers using the screws removed in
step 2. Start by installing one screw in the carter hole of each retainer, it will help you position the trims.
Make sure the glass does not move and remain centered before installing the other screws.
screw must be snuggled against the retainer not over tighten. Once the retainers are secured the tabs
should barely touch the glass ...
WARNING: REPLACEMENT GLASS SHOULD ONLY BE PURCHASED FROM A DROLET DEALER (SEE
"REPLACEMENT PARTS'' SECTION). TEMPERED GLASS OR ORDINARY GLASS WILL NOW
WITHSTAND THE HIGH TEMPERATURES OF THE ECO-65.
Each