3.5.
ASH REMOVAL
In order to remove ashes form the ash drawer, simply unscrew the wing nut, open the access door, and empty
the ash drawer.
Attention, it is important that the ash drawer is in place and the access door is kept closed
while the appliance is in use.
FIGURE 22
Ash Drawer
3.5.1. ASH DISPOSAL AND USE OF AN ASH VACUUM
Ashes must be placed in a metal container with a tight fitting lid. The closed container should be placed on a
non-combustible floor or on the ground, well away from all combustible materials, pending final disposal. This
container should not receive any other type of waste. If the ashes are disposed of by burial in soil or otherwise
locally dispersed, they should be retained in the closed container until all cinders have been thoroughly cooled.
Once the ashes have been removed, you should take this opportunity to thoroughly vacuum around the ash
drawer with an ash vacuum.
3.6.
DOOR ADJUSTMENT
In order for your stove to operate properly, the door should be adjusted periodically to provide an air tight fit. To adjust:
• Remove the lock pin (spring pin) by pulling and turning it using pliers ("wise grip")
• Turn the handle counter clock wise one turn to increase pressure
• Re-install the lock pin (spring pin) with a small hammer