Cisco TELEPRESENCE MOVI 4.1 - ADMINISTRATOR GUIDE V4.1.1.9724 Administrator's Manual page 14

Field Default
Enable MNS Mode Off
Encryption Depends on the
Transport configuration
in the Advanced settings
of the Movi client, which
is Auto by default.
Maximum In 512 kbps (adjustable to
Bandwidth up to 2014 kbps from
within the client)
Maximum Out 384 (adjustable to up to
Bandwidth 2014 kbps from within
the client)
Media Port Range 21900
End
Media Port Range 21000
Start
Multiway
Participant URI
Phone Book Uri If no value is set, the
Movi client will not be
able to search for
contacts.
Cisco TelePresence Movi Administrator Guide (4.1)
Deploying and upgrading the client
Description
Enabling this option forces relayed media to be relayed via
private HD links with guaranteed capacity to ensure quality
of video.
This setting relies on ICE being enabled. Private dedicated
links are provided by companies such as Media Network
Services.
This setting is only available in TMS 12.6 or later after
uploading the MoviProvisioningConfigTemplate.xml file.
Determines the encryption policy for the account. This
configuration affects both the SIP communication (Transport
TLS or TCP) and the media communication (SRTP or no
SRTP).
See the Call setup section for more information.
Determines the maximum bandwidth that can be
received/sent by the account. The Movi client will be set to
send the provisioned value. With no provisioning, the default
starting level is lower than the maximum that can be set by
the user.
High bandwidth is directly related to good video quality, but
bandwidth control can be useful to prevent a client from
trying to receive/send beyond its capacity, as this may result
in packet loss, jitter and general low video quality.
The upper/lower bound of the port numbers that that are used
in the video and audio communication.
These can be configured to control security/firewall issues. A
range of minimum 10 ports must be provisioned, or Movi will
revert to default.
When Multiway is initiated, participants are directed to this
Uniform Resource Identifier (URI). See the Multiway
Initiation section for more information.
This setting is only available in TMS 12.6 or later after
uploading the MoviProvisioningConfigTemplate.xml file.
Enables the account to search for other accounts in the
Cisco TMS Agent database.
This configuration should be a URI on the form:
phonebook@<sip_domain>.com
Page 14 of 29