Explanation Front Panel; Explanation Rear Panel - DREAM MULTIMEDIA DM 500 S C T User Manual

Digital satellite receiver for free and encrypted digital video broadcasting (dvb)
Table of Contents

Advertisement

U s e r M a n u a l D r e a m b o x D M 5 0 0
3.
E x p l a n a t i o n f r o n t p a n e l
3.1
Smartcard Reader
Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into the
Smartcard reader. Dreamcrypt is a registered trademark of Dream-Multimedia.
3.2
Standby LED
The Standby LED lights up red if the Dreambox is in standby mode. It lights up green if the
Dreambox is powered on.
3.3
Remote Control (RC) Led
The remote control LED lights up every time the Dreambox receives a signal from the remote
control.
3.4
Standby on/off
The Standby on/off button toggles between standby mode and powered on mode.
4.
E x p l a n a t i o n r e a r p a n e l
4.1
Antenna input (DM 500-C/T)
Connect your antenna cable here.
4.2
Antenna output (DM 500-C/T)
You can optionally connect your TV or VCR here.
4.3
LNB input (DM 500-S)
Connect the coaxial cable from your LNB here.
4.4
LNB output (DM 500-S)
You can connect an analogue/digital receiver here. Remember to shutdown your Dreambox
completely in order for the receiver to work.
4.5
Video output (FBAS)
You can optionally connect your Dreambox to a TV using a RCA/Chinch cable. (Composite)
4.6
Audio output - analog (Cinch)
Connect your Dreambox with a RCA/Cinch cable to your HiFi-Amplifier (e.g. AUX In or Tape
In ports).
5
english

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents