Dreamup - Preparing The Software - Dreambox DM 7000-S Instruction Manual

16. DreamUp – operating software update
16.1 DreamUp – preparing the software
Start the DreamUp software on your computer.
Select the COM interface which you have connected with your Dreambox.
Make sure that the checkbox "Use Network" is checked.
Enter the IP address of your computer that you noted down to the right of
„Local IP (PC)".
To the right of „Remote IP (Box)" enter, for example, 10.0.0.85.
This IP address is assigned to your Dreambox by the software.
Make sure that this IP address is not allocated in your home network, unless
you are working with a crossover patch cable.
You have now configured the software to your needs.
37
16. DreamUp – operating software update