Rio CARBON 5GB Manual page 10

Chapter 2
:: Basic Connections
This chapter describes how to connect the Rio Carbon to Earphones, USB cables, and alternate devices. Basic
connections include:
Earphones
Connect the supplied earphones to the EARPHONES port on the top of the Rio Carbon.
USB-AC
The Rio Carbon requires a USB connection to transfer files and/or recharge its battery. If using a USB
hub, connect to a powered USB hub. Unpowered USB hubs may not work.
Use the USB cable to connect the Rio Carbon to the USB port on your computer to transfer music or
files to and from the Rio Carbon and your computer. When connected to the USB port on your
computer, the Rio Carbon cannot play music.
Use the USB cable to connect the Rio Carbon to the USB port on the USB-AC adapter to quickly
recharge the battery on the Rio Carbon. When connected to the USB port on the USB-AC adapter, the
Rio Carbon can play music.
USB Detection with the Windows Device Driver
USB connectivity is ready to work immediately after
If for any reason the Windows Device Driver Wizard is displayed after the USB cable has been
plugged into both the Rio Carbon and the computer, please follow these steps:
1 Confirm the Rio installation CD is in the computer's CD-ROM drive.
2 Check the CD-ROM Drives box when the Windows Device Driver Wizard requests the
location of the Rio Carbon drivers.
3 Click Next and follow the Windows Device Driver Wizard instructions.
Connections
Rio Music Manager has been installed.
Table of Contents Index
6