Cadillac ESCALADE EXT 2003 Manual page 387

After mounting the spare,
put the wheel nuts back
on with the rounded
end of the nuts toward
the wheel. Tighten
each wheel nut by hand.
Then use the wheel
wrench to tighten
the wheel nuts until the
wheel is held against
the hub.
8. Tighten the nuts
firmly in a crisscross
sequence as shown by
turning the wheel
wrench clockwise.
7. Turn the wheel wrench counterclockwise to lower
the vehicle. Lower the jack completely.
Incorrect wheel nuts or improperly tightened
wheel nuts can cause the wheel to come loose
and even come off. This could lead to an
accident. Be sure to use the correct wheel
nuts. If you have to replace them, be sure to
get new GM original equipment wheel nuts.
Stop somewhere as soon as you can and have
the nuts tightened with a torque wrench to the
proper torque specification. See "Capacities
and Specifications" in the Index for wheel nut
torque specification.
5-86