Table of Contents
Advertisement
5. Turn the vertical aiming screw (V) until the
headlamp beam is aimed to the horizontal tape line.
The top edge of the cut
the bottom edge of the horizontal tape line.
6. Repeat steps 4 and 5 for the opposite headlamp.
6-46
-
off should be positioned at
Front Turn Signal, Sidemarker and
Daytime Running Lamps
-
A. Low
Beam Headlamp
B. Daytime Running Lamp
C. Sidemarker Lamp
-
D. High
Beam Headlamp
E. Front Turn Signal Lamp
Advertisement
Chapters
Table of Contents
