Removing The Flat Tire And Installing The Spare Tire - Buick LESABRE 1996 Manual

Removing the Flat Tire and Installing the
Spare Tire
1. Use the wheel wrench to loosen the wheel nuts, but
don't remove them.
2.
3.
Attach the wheel wrench to the bolt on the end of the
jack and rotate the wrench clockwise to raise the jack
head a few inches.
Near each wheel well is a notch in the frame to put
the jack head into. The front notch is 10 inches
(25 cm) back from the front wheel well. The rear
notch is 8 inches (25 cm) forward from
the
rear
wheel well.
5-27