Section 8 - Technical Information; Type Approvals And Standards; Characteristics; Accessories - ACR Electronics SAT2 Product Support Manual

Emergensy position indicating radio beacons
Table of Contents

Advertisement

SECTION 8 – TECHNICAL INFORMATION
8.1

Type Approvals and Standards

The RLB-32 and RLB-33 meet the requirements of Federal Communication Commission (FCC) Part 80 and Category I
EPIRBs meet the GMDSS requirements:
Type Approvals
FCC
COSPAS-SARSAT
MED
Copies of certificates and additional worldwide type approvals are available at http://www.acrelectronics.com.
Applicable Standards
Part 80 Subpart V – EPIRBs
FCC
Part 80 Subpart W – GMDSS (Cat. 1 only)
RTCM
RTCM Recommended Standards for 406 MHz Satellite EPIRBs
C/S T.001 – Specification for C/S 406 MHz Distress Beacons
COSPAS/SARSAT
C/S T.007 –C/S 406 MHz Distress Beacon Type Approval Standard
Annex A.1, Item No. A.1/5.6 – 406 MHz (C/S) Satellite EPIRB
MED
Annex B, Model B
IMO Resolution A.694(17) – General Requirements for GMDSS Equipment
IMO Resolution A.810(19) – Performance Standards for Float-Free Satellite
IMO
8.2

Characteristics

The EPIRB is a buoyant, battery operated unit. The beacon case, with its external antenna, is waterproof. The
semiconductor circuits are mounted within the case assembly that also contains the battery power supply. A "Test/ON"
switch is installed on top of the beacon, along with a strobe light. The Category I beacon must be stored in its special
mount, free of obstructions aboard a vessel for automatic float-off. The unit is self-buoyant and no external flotation
devices are required.
8.3

Accessories

Product Number
9455
9430
9388.1
9388
9490
9368
Y1-03-0148-2 Rev. K
FCC ID: B668L2ACR-RLB-33 (RLB-33)
FCC ID: B668L2ACR-RLB-32 (RLB-32)
Certificate No. 108 (RLB-33)
Certificate No. 107 (RLB-32)
BSH Certificate No.: 6492/050564-2/2004 (RLB-33)
BSH Certificate No.: 6492/050564-1/2004 (RLB-32)
Notified Body: 0735
406 MHz EPIRBs (Cat. 1 only)
Product
™ Category I Mounting Case
SeaShelter
2
6.5" x 17.1" (16.51 cm x 43.4 cm)
™ Category II Mounting Brackets
LowPro
2
6.0" x 7.7" (15.2 cm x 19.5 cm)
Category I
GPS Interface Plug- Rapid Fix™
Category II
GPS Interface Plug- RapidFix™
HydroFix™ hydrostatic release unit for Category I bracket
Replacement Antenna (for RapidFix™ and Satellite
406™ only)
2
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rapidfix 406Satellite2 406

Table of Contents