Install The Vsphere Host Update Utility - VMware ESX 4.0 - INSTALLATION GUIDE UPDATE 1 Installation Manual

Procedure
1 Select Start > Programs > VMware > VMware vSphere Client.
2 In the vSphere Client login window, log in to an ESX/ESXi host as root or as a normal user, or log in to a
vCenter Server system as the administrator.
a Enter the IP address or host name.
b Enter your user name and password.
When you connect to the vCenter Server, use the vCenter Server IP address with your Windows login
user name and password. Use the login credentials appropriate to the Windows machine on which vCenter
Server is installed. The vCenter Server user name and password might be different than the user name
and password that you use for ESX/ESXi.
3 Click Login.
If you cannot connect to the vCenter Server system, you might need to start the VMware VirtualCenter
Management Webservices service manually. To do this, select Settings > Control Panel > Administrative
Tools > Services > VMware VirtualCenter Management Webservices and start the service. The machine
might require several minutes to start the service.
4 To ignore the security warnings that appear, click Ignore.
Security warning messages appear because the vSphere Client detects certificates signed by the ESX/ESXi
host or vCenter Server system (default setting). For highly secure environments, certificates generated by
a trusted third-party are recommended.

Install the vSphere Host Update Utility

The vSphere Host Update Utility is for updating and patching ESXi 4.0 hosts and upgrading ESX 3.x/ESXi 3.5
hosts to ESX 4.0/ESXi 4.0.
The vSphere Host Update Utility is bundled with the vSphere Client. You can install the utility when you
install the vSphere Client. If the vSphere Client is already installed and the vSphere Host Update Utility is not,
use this procedure to install vSphere Host Update Utility.
Prerequisites
To use vSphere Host Update Utility, you must have the following:
Workstation or laptop with the vSphere Client installed.
n
Network connection between the ESX/ESXi host and the workstation or laptop.
n
Internet connectivity to download patch and update bundles or upgrade images from VMware.com if you
n
do not have a local depot.
Procedure
1 Open a command window by selecting Start > Run and then entering
2 Navigate to the folder that contains
This executable is in the
3 Run the following command.
VMware-viclient.exe /S /V" /qr INSTALL_VIUPDATE=1 /L*v %temp%\vim-viu-launch.log"
The vSphere Host Update Utility is installed.
What to do next
Scan hosts and apply available updates or upgrade a host.
VMware, Inc.
VMware-viclient.exe
subfolder of the vCenter Server installation package.
\vpx
Chapter 13 Postinstallation Considerations for vCenter Server
.
cmd
.
107