How To Adjust Resistance Level - MINOURA VFS150 Instruction Manual

How To Adjust Resistance Level

VFS150 non-remote version doesn't have any resistance level adjustment. It is fixed at all times.
On the other hand, VFS150-R remote version features a convenient remote shifter lever. You can install it on
the handlebar or stem, then you can control the resistance level without getting off the bike.
Wind the band around the handlebar and hook the metal ring to the gutter on the remote shifter base.
1.
(see Fig. L-1)
lip up the lever to lock (see Fig. L-2). If it is loosened, adjust the band tighter as per instructed in the
2.
F
following section.
The soft fabric band is pre-adjusted to fit normal 22mm diameter handlebar.
3.
If you need to mount onto an oversized or specially shaped handlebar or stem, adjust the band (see Fig. M).
At this moment, we suggest you to slide the guide pin downward (see the column) to loosen the band for
easier work.
1
To increase the resistance, twist the lever toward "H". To decrease the resistance, twist the lever towawrd
4.
"L". (see Fig. N)
You can choose from 7 different levels to suit your desired workout level.
2
1
(Fig. L)
3 2
(Fig. M)
- Page 7 -
Decrease
(Fig. N)
Increase