Advertisement
TO ADJUST STEAM VALVE AND SOLENOID LINKAGE:
1. Set steam valve extension bar and solenoid lever at 90º as shown and tighten set
screw.
Adjust steam valve adjusting nuts until 1/32" to 1/16" gap is obtained as shown
above and lock adjusting nuts tightly together.
SOLENOID LINKAGE ADJUSTMENT
SOLENOID LINKAGE
SOLENOID LINKAGE
SOLENOID LINKAGE
SOLENOID LINKAGE
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
Page 16
Page 16
Page 16
Page 16
Page 16
Advertisement
