Charging The Battery; Sd Memory Card; Car Adaptor - Binatone B430 User Manual

QUICK START GUIDE

Charging the Battery

Before using your PND for the first time, we recommend you to charge the unit for 5
hours via the USB cable or 2 hours via the car charger in order to charge the battery.
Plug the USB cable or car charger into the USB socket .
The charging indicator on the front of the unit will light up red or orange. When the
unit is fully charged the red light will turn green.
When you use the PND in you car, we recommend that you always use the car
charger in order to maintain the battery level.
If you have a SD memory Card, you may install it refer to the picture
(below)
Switch the unit off first before installing or removing the SD card.
When installing it can only be fitted one way – contacts towards you and the cut-off
corner at the top. Slide the card in and push it in so that it clicks in place.
Once the card is installed it does not need to be removed.
If you need to remove the card, push the card in and it will eject from the slot.
Car Adapter
When using your PND in the car we recommend that you always use the in-car
charger to power the unit, especially on long journeys.
Plug the in-car charger into the USB socket of the unit. Pug the other end of the
adapter into the car's cigarette-lighter / 12V DC socket.
6 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)