Connecting To The Audio System; Back Panel Audio Connectors - Intel DG45FC - CARACTERISTIQUES TECHNIQUES Product Manual

Connecting to the Audio System

After installing the IDT audio driver from the Intel Express Installer DVD-ROM, the
multi-channel audio feature can be enabled. Figure 18 shows the back panel audio
connectors.
NOTE
The back panel line out connector is designed to power either headphones or amplified
speakers only. Poor audio quality may occur if passive (non-amplified) speakers are
connected to this output.
Installing and Replacing Desktop Board Components
Item Description
A Rear Surround Left/Right
B Center Channel and LFE (Subwoofer)
C Side Surround/Line In
D Line Out
E Mic In
F S/PDIF Digital Audio Out (Optical)
Figure 18. Back Panel Audio Connectors
45