GMC SIERRA DENALI Navigation Manual page 6

Before you begin to operate the navigation system, read
this manual thoroughly to become familiar with it and
to understand how the system works.
The navigation system allows you to do the following:
•
Plan a route with provided turn-by-turn route
and map guidance with voice prompts.
•
Select a destination using various methods and
choices.
•
Receive broadcast announcements on traffic and
emergency alert communications.
The information in the system may not always be
complete. Road conditions such as prohibited turns,
detours, and construction zones, change frequently. It is
important to consider whether you can follow the
directions given by the system for the current conditions.
Use of the navigation system may be restricted in
some U.S. states and Canadian provinces. Check with
your state/provincial motor vehicle agency.
Navigation Joystick
The navigation joystick, located on the bottom left corner
of the navigation system, is used to make selections in
the navigation system. See the navigation system
overview shown previously for more information on
location.
Move the joystick to the left, right, up, down, or
diagonally to move around the screens, and press the
center of the joystick to enter a selection.
1-4
Screen Setup
CONFIG (Configuration) Key: Press the CONFIG key
located to the left of the navigation screen, to access
the Setup menu.
The Setup menu allows you to adjust such things as
screen color, appearance, and language of the display
for the navigation system.
See "Hard Keys" under Using the Navigation System on
page 2-2 for more information on hard key functions.