Identifying Hp 3D Driveguard Status - HP 2230s - Notebook PC Hardware Manual

Identifying HP 3D DriveGuard status

The drive light on the computer changes to an amber color to show that the drive is parked. To determine
whether drives are currently protected or whether a drive is parked, select Start > Control Panel >
Mobile PC > Windows Mobility Center:
●
If the software is enabled, a green check mark is superimposed over the hard drive icon.
●
If the software is disabled, a red X is superimposed over the hard drive icon.
●
If the drives are parked, a yellow moon is superimposed over the hard drive icon.
NOTE: The icon in the Mobility Center may not show the most up-to-date status for the drive. For
immediate updates after a change in status, you need to enable the notification area icon.
To enable the notification area icon:
1. Select Start > Control Panel > Hardware and Sound > HP 3D DriveGuard.
2. On the Icon in System Tray row, click Show.
3. Click OK.
If HP 3D DriveGuard has parked the drive, the computer will behave in the following ways:
●
The computer will not shut down.
● The computer will not initiate Sleep or Hibernation, except as described in the following Note.
NOTE:
DriveGuard allows the computer to initiate Hibernation.
● The computer will not activate battery alarms set on the Alarms tab in Power Options properties.
Before you move the computer, HP recommends that you either shut it down or initiate Sleep or
Hibernation.
14 Chapter 6 Using HP 3D DriveGuard
If the computer is running on battery power and reaches a critical battery level, HP 3D