Evic Functions - Dodge 2010 Caliber Owner's Manual

1. Turn the ignition switch to the ON position (do not
start the engine).
2. Fully depress the accelerator pedal slowly three times
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
UNDERSTANDING YOUR INSTRUMENT PANEL 205

EVIC Functions

EVIC Button
Press the EVIC button until one of the following func-
tions are displayed on the EVIC:
• Compass/Temperature/Audio
• Average Fuel Economy
4