Dodge 2008 Dakota Owner's Manual page 89

entry you wish to call. The first call will be on hold while
the second call is in progress. To go back to the first call,
refer to Toggling Between Calls. To combine two calls,
refer to Conference Call.
Place/Retrieve a Call from Hold
To put a call on hold, press the Phone' button until you
hear a single beep. This indicates that the call is on hold.
To bring the call back from hold, press and hold the
"Phone" button until you hear a single beep.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the "Phone" button until you hear a single beep
indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at one
time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89
Conference Call
When two calls are in progress (one active and one on
hold), press and hold the "Phone" button until you hear
a double beep indicating that the two calls have been
joined into one conference call.
Three-Way Calling
To initiate three-way calling, press the "Voice Recogni-
tion" button while a call is in progress and make a second
phone call as described under Making a Second Call
while Current Call in Progress. After the second call has
established, press and hold the "Phone" button until you
hear a double beep indicating that the two calls have
been joined into one conference call.
Call Termination
To end a call in progress, momentarily press the "Phone"
button. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active call.
If the active call is terminated by the far end, a call on
3