Table of Contents
Advertisement
3.
Image
You can adjust the image Sharpness, Trace Free, Aspect Control, ASCR,
Position (VGA only), and Focus (VGA only) from this main function.
•
Sharpness: Adjust the picture sharpness. The adjusting range is
from 0 to 100.
•
Trace
technology. The adjusting range is from lower 0 to faster 100.
Aspect Control: Adjust the aspect ratio to "Full", "4:3", "1:1", or
•
"Over Scan". (The "4:3" ratio is only for 4:3 or 5:4 image source.
The "Over Scan" ratio is only available for HDMI input.)
•
ASCR: Turn on or off the ASCR (ASUS Smart Contrast Ratio)
function. (Only available at Scenery Mode and Theater Mode.)
•
Position: Adjust the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
•
Focus: Reduce Horizontal-line noise and Vertical-line noise of the
image by adjusting (Phase) and (Clock) separately. The adjusting
range is from 0 to 100 (only available for VGA input).
•
AUTO Adjust.: Automatically adjust the image to its optimized
position, clock, and phase. (Only available for VGA input.)
•
•
3-5
PB278
Splendid
Color
Image
Sound
Input Select
System Setup
Free: Speed up the response time by Over Drive
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows
vertical stripes and the image is not proportional.
Sharpness
Trace Free
Aspect Control
ASCR
Position
Focus
AUTO Adjust.
Move
Menu
50
60
Full
OFF
Exit
Chapter 3: General Instruction
Hide quick links:
Advertisement
Table of Contents
