Dodge 2006 DR Ram SRT-10 Owner's Manual page 27

Lap/Shoulder Belt Operating Instructions
1. Enter the vehicle and close the door. Sit back and
adjust the seat.
Latch Plate
2. The seat belt latch plate is above the back of the front
seat, next to your arm in the rear seat. Grasp the latch
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27
plate and pull out the belt. Slide the latch plate up the
webbing as far as necessary to allow the belt to go around
your lap.
3. When the belt is long enough to fit, insert the latch
plate into the buckle until you hear a "click."
Removing Slack From Belt
2