Table of Contents
Advertisement
Chapter 1
Chapter 1:
Product Overview
Thank you for choosing the Wireless-G Ethernet Bridge. The
versatile Wireless-G Ethernet Bridge can make any wired
Ethernet-equipped device a part of your wireless network.
At home, use the Bridge to connect game consoles, set-
top boxes, or computers to your Wireless-G network and
its shared high-speed Internet connection. In the office,
convert your Ethernet-wired printer, camera, notebook or
desktop into a wireless networked device.
Front Panel
Power
(Green) This LED lights up when the
Bridge is powered on. The LED flashes while the
Bridge is booting up and performing a self-test,
and remains lit after the self-test has ended.
Ethernet
(Green) This LED will be lit steadily
when the Bridge is connected to the wired
network. The LED will flash when there is wired
network traffic.
Wireless-G Ethernet Bridge
Wireless-G
(Green) This LED will be lit steadily
when the Bridge is connected to the wireless
network. The LED will flash when there is
wireless network traffic.
Back Panel
Reset
When pressed, the Reset button resets
the Bridge to its factory default settings.
LAN
The LAN port is where you will connect
the Ethernet network cable.
Power
The Power port is where you will
connect the power adapter.
NOTE:
If you reset the Wireless-G Ethernet
Bridge, you will erase all of your settings (WEP
encryption, wireless settings, etc.) and replace
them with the factory defaults. Do not reset the
Wireless-G Ethernet Bridge if you want to retain
these settings.
Product Overview
1
Advertisement
Table of Contents
