How To Set Up Wireless Security Using Wi-Fi Protected Setup; Wi-Fi Protected Setup Activity Light; Connecting A Device Using The Wi-Fi Protected Setup Button - Cisco Linksys EA2700 User Manual

Linksys EA-Series
To manually set your router's wireless security settings:
Wireless > Wireless Settings
1. Log into the browser-based utility (see "How to open the browser-based
utility" on page 20).
2. Click the Wireless tab, then click the Wireless Settings page.
3. Select your preferred security type from the Security Mode drop-down
list For most home networks, we recommend WPA2/WPA Mixed Mode.
4. Enter a passphrase (security key) for your wireless network in the
Passphrase field. The most secure type of security key should include a
mix of uppercase and lowercase letters, numbers, and punctuation.
5. Click Save Settings at the bottom of the screen.
How to set up wireless security using
Wi-Fi Protected Setup
For
ALL
Why would I use Wi-Fi Protected Setup? Wi-Fi Protected Setup™ is a feature
of your router that makes it easy to add devices to your wireless network. If you
have network devices, such as wireless printers, that support Wi-Fi Protected
Setup, then you can use Wi-Fi Protected Setup to add the devices.

Wi-Fi Protected Setup activity light

The power indicator light on the back of the router (or on top for the EA4500)
indicates the status of Wi-Fi Protected Setup while you are connecting devices.
When Wi-Fi Protected Setup is connecting a network device, the light
•
flashes slowly.
If there is an error, the light flashes quickly for two minutes. Wait until it
•
stops flashing, then try again.
When Wi-Fi Protected Setup has finished connecting a device, the light
•
is continuously lit .
• Wait until the light is continuously lit before starting the next Wi-Fi
Protected Setup session.
Connect network devices using one of the three methods below.
NoTE
Wi-Fi Protected Setup configures one device at a time. Repeat the
instructions for each device that supports Wi-Fi Protected Setup.
Connecting a device using the Wi-Fi Protected Setup
button
Use this method if your device has a Wi-Fi Protected Setup button or prompts
you to press the Wi-Fi Protected Setup button on your router.
To connect a device using the Wi-Fi Protected Setup button:
Wireless > Wireless Settings
1. Press the Wi-Fi Protected Setup button on the network device you are
connecting to.
2. Press the Wi-Fi Protected Setup button on the back of the router.
- OR -
a. Log into the browser-based utility (see "How to open the browser-
based utility" on page 20).
b. Click the Wireless tab.
c. Click Wi-Fi Protected Setup.
d. Click the Wi-Fi Protected Setup button in the router's Wi-Fi Protected
Setup screen.
e. After the device has been configured, click oK.
Improving Security
38