Com Device Properties - Symantec PCANYWHERE - OLE AUTOMATION GUIDE V12.1 Manual

COM device properties

Property
<CRemoteData>.ComParity(String)
<CRemoteData>.ComFlowControl(String)
<CRemoteData>.ComStartedBy(String)
Table 2-25 describes the properties and parameters that let you customize the
port settings for modem and other COM-based connections. Replace the
information in angle brackets with the actual values.
Table 2-25 COM device properties and parameters
Parameter Description
String Sets the communications parity
The following values are valid:
<None>
■
Odd
■
Even
■
Mark
■
Space
■
String Sets the flow control of COM-based connection
types
The following values are valid:
<None>
■
XONXOFF
■
RTS/CTS
■
Both
■
String Sets the start setting of COM-based connection
types
The following values are valid:
Always connected
■
Carrier detect (DCD)
■
Clear to send (CTS)
■
Data set ready (DSR)
■
Ring indicator (RI)
■
Receive 2 <CR>'s
■
Modem response
■
Visual Basic object definitions
CRemoteData properties
31