Step7 Shock Absorber - THUNDER TIGER TOMAHAWK VX Manual

STEP7
Shock Absorber
1
Shock Shaft
2
2.5mm
E-Clips
E
3
Shock Eyelet
4
2.8x1.9mm
O-Ring
O
4
x
Silicon oil
Pull down the piston and
slowly fill in the silicon oil.
oil
The factory set-up of the
shock is #500 of silicon oil
for the front and rear shock
absorbers.
Piston
Then gently move the shaft/piston
up and down to get rid of the
bubbles.
1mm
4mm
Use 6 mm preload spacer for front. Use 6 mm preload spacer for rear.
6mm
Hint Apply silicon oil
oil
4
2
8
2
1
4
8
Cover the shaft with cloth before
griping it with pliers.
#500
2mm
6mm
4
Assemble as many times as specified
x
4
4
x
Add silicon oil one more
time up to the brim.
Ensure the piston move
smoothly.
Put the shock bladder onto
the shock body, wipe off
excess oil and tighten the
shock cap.
10
Attach the shock eyelet onto
the shock shaft until it reaches
the mark line on the shaft
4
Compress the spring
and install spring cup.
4
x