Product Description - Cisco AIR-LMC352 Ordering Manual

Product Description

The following table describes each of the parts identified previously.
Cisco Aironet 1200 Series Access Point Platform
The Cisco Aironet 1200 Series access point platform is the basic electronic chassis of the AP . When populated with at
least one radio module, the platform then provides the infrastructure for a Wireless LAN.
The platform supports:
• Simultaneous, dual-band operations with interfaces for mini-PCI and CardBus radios
• Dual RP-TNC connectors for external 2.4 GHz antennas (antennas are sold separately)
• 10/100 Auto-Sensing Ethernet uplink
• Powering from Cisco in-line power over Ethernet (CDP) or local power supply
• Console access
The platform ships with a 110-220 VDC local power supply. It is available with either the VxWorks or Cisco IOS
operating systems.
AIR-AP1200 (refer to Note below)
AIR-AP1210
Note: The VxWorks operating system does not support 802.11g. Cisco Aironet 1200 Series Access Points using the
VxWorks OS must be upgraded to Cisco IOS to support the 802.11g radio module.
Radio Modules
The radio module provides the radio frequency interface required for a wireless connectivity.
802.11a Radio Modules
IEEE 802.11a compliant
CardBus form factor
5 GHz operation
Up to 54 Mbps
Integrated diversity antennas
AIR-RM20A-A-K9
AIR-RM20A-J-K9
AIR-RM20A-S-K9
AIR-RM20A-T-K9
802.11b Radio Modules
IEEE 802.11b compliant
Mini-PCI form factor
2.4 GHz operation
Up to 11 Mbps
Dual RP-TNC connectors for externally attached antennas (not included)
AIR-MP20B-A-K9
AIR-MP20B-E-K9
AIR-MP20B-I-K9
AIR-MP20B-J-K9
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
VxWorks Operating System
Cisco IOS Operating System
FCC (Americas) Configuration
TELEC (Japan) Configuration
Singapore Configuration
Taiwan Configuration
FCC (Americas) Configuration
ETSI (Europe) Configuration
Israel Configuration
TELEC (Japan) Configuration
Cisco Systems, Inc.
Page 3 of 6