Table of Contents
Advertisement
Digital Entertainer HD Rear View
The rear view of the Digital Entertainer HD is shown below.
wireless
antenna
Figure 1-2
The Digital Entertainer HD is compatible with all cables described in the
table below, though some cables are not included in the package.
Table 1-1. Rear panel description
Item
Wireless antennas
S/PDIF (audio)
coaxial port
Composite video and
stereo audio port
USB v2.0 port
Reset button
Power connector
SCART port
1-4
composite
video
S/PDIF
coaxial
(audio)
S-Video
SCART
HDMI
component
Compatible Equipment and Cables
Two wireless antennas are attached.
Sony/Phillips Digital Interface (S/PDIF) cable, also called
standard RCA type coaxial cable (not included).
Composite video and stereo audio cables (included),
which can be used with most televisions in the US.
USB mass storage devices such as hard drives, media
players (including Windows or Mac formatted Apple
iPods) and flash memory devices.
Reset the Digital Entertainer HD to its default factory
settings. To reset, press and hold the button down while
the unit is powering up. The power LED blinks to
acknowledge the reset request.
IEC Digital Entertainer HD power cord (included).
SCART television cable (not included) that is widely used
in Europe and Australia.
USB
wireless
port
antenna
stereo
reset
audio
optical
audio port
Ethernet port
with LEDs
video
power
Advertisement
Table of Contents
Troubleshooting
