Section - Configuration
Wired Connection
If DHCP is enabled on your network, select Auto (Recommended).
If DHCP is not enabled on your network, select Advanced Setup to
enter the wireless network settings manually.
If you selected
Auto (Recommended),
your DSM-750 will automatically
setup the required network settings and display a "successfully
connected" message (please skip to the "Wired Connection
Complete" section on page 88).
Advanced Setup,
If you selected
you will need to setup your DSM-750
with the required wireless network settings (please continue to the following
page).
D-Link DSM-750 User Manual
5