Table of Contents
Advertisement
2.3.5 Advanced
To configure the Hyper-Text Transfer Protocol (HTTP) server parameters:
1. Click the Advanced tab from the ASUS VideoSecurity setup page.
2. Click the Enable HTTP Server check box to enable or disable the use
of the HTTP Server. When enabled, key-in your Internet Protocol (IP)
address, Port and Connection timeout (in seconds.)
3. Click the Enabled server authentication check box to enable or
disable the server authentication feature. When enabled, key-in your
account name and password.
4. Click Apply to apply settings or click OK to save settings and exit.
Click Cancel if you want to exit and discard changes. Click Help to
launch the ASUS VideoSecurity online help.
20
Advertisement
Table of Contents
