Miscellaneous Issues; Effective Date - HP Integrity BL860c Release Note

Storageworks emulex fibre channel host bus adapters for proliant and integrity servers using microsoft windows and vmware operating systems

Hide thumbs Also See for Integrity BL860c:

Datasheet (511 pages)

User's & service manual (184 pages)

Deployment manual (84 pages)

Table of Contents

HBA interacts with the non-boot HBAs. A work-around is to reconfigure the zoning such that the

boot instance (for each path) is in its own zone separate from the other non-boot HBAs. In some

cases, this may also result in faster boot-up times.

•

When installing to storage attached to the 403621-B21 LPe1105 mezzanine card in a VC envir-

onment through a Brocade switch, both the target LUN and the WWN for the boot controller will

not be visible in the zone, in the switch administrative tool. The work-around is to take note of the

mezzanine card's WWN when installing it into the system, or get it from the VC manager or EFI

utility. Then manually enter the WWN into the desired zone on the switch when configuring the

zone. Scan for targets and continue with normal installation steps to boot from the mezzanine

card.

•

EFI boot path configuration will not detect multiple controller ports connected to one HBA thru

McData fabric.

•

In a BFS configuration, the installed HBAs may display different names when viewed through the

device manager. This is a cosmetic condition, not a functional issue.

•

The Emulex 81E and 82E HBAs (AJ762A and AJ763A) running the Universal Boot Image 5.03a0,

does not support Boot from SAN on the DL160 G5 Proliant server.

•

When the Load Driver option is selected during the operating system build of a Windows 2008

server in a Boot from SAN Configuration, a multiple entry of the Emulex driver will be displayed.

If multiple types of HBAs are displayed, select the first entry, then proceed.