Using Plug-In; Using The Editing Commands - Canon CanoScan D646U User Manual

Using Plug-in

You can utilize CanoScan Toolbox effectively by using various image adjusting and enhancing functions
of Plug-in Module CS. Refer to the Plug-in Module CS User's Guide bundled with your scanner for its
installation and functions.

Using the Editing Commands

The commands on the Edit menu allow you to cut, copy, paste, clear, select all, deselect, and set scanning
preferences for images.
Undo
To reverse the effects of a command you have selected, choose the Undo command.
Cut
To cut a portion of the image:
1. Select an area to cut using the select tool.
2. Choose the Cut command.
Copy
To copy a portion of the image:
1. Select an area to copy using the select tool.
2. Choose the Copy command.
Paste
To paste a selection onto the image:
1. Place the cursor where you want to put the selection.
2. Choose the Paste command.
Clear
To delete a portion of the image:
1. Select an area to delete by using the select tool.
2. Choose the Clear command.
Select All
To select everything in the image, choose the Select All command.
None
To deselect items you have selected using either the Lasso or Select tools, choose the None command.
CanoScan Toolbox 17