3.
Insert the RAID card into the PIKE
RAID card slot. Ensure that it is
completely seated on the PIKE
RAID card slot.
4.
Connect the SAS cable to the SAS
connectors on the motherboard.
For PIKE 1064E, connect the cable
to the connectors labeled SAS1-4
(red). For PIKE 1078 and 6480,
connect the cable to the connectos
labeled SAS1-8 (red and blue).
2.7.3
Installing i Button
Follow the steps below to install an optional i Button on your motherboard.
1.
Locate the I Button slot on the
motherboard.
2.
Snap the I Button in place.
You need to install I Button before using PIKE 1078 functions.
ASUS TS300-E6/PS4
2-21