SABINE
Guide to Creating Sabine Navigator Part Numbers
Use this guide to generate the correct model number and price for your Sabine Navigator. This
example shows how you would create a part number for a 4x8 Navigator, with a blank front panel and
Ethernet connectivity, with the optional Mic Preamps, Digital Audio I/O, and the connector for the Wall
Panel Remotes. You may choose less options and in this case your part number will be shorter.
Step 1
Choose your Base Model
Choose from either front panel
control or a blank front panel
Step 2
If needed, choose your First Option
Mic Preamps
• for all models
• price is model dependent
Step 3
If needed, choose your Second Option
Digital Audio Input/Output
• only for NAV4802 or 8802
• price is model dependent
Step 4
If needed, choose your Third Option
Wall Panel Remote-ready (Wall Panel not included)*
• for all models
• same price for all models
Step 5
Choose your Voltage
This is country dependent.
U is for USA 120V
Complete Part Number and Net Price for this model
NAV4802-S-MDR-U
Part numbers vary in length according to the options chosen. For example, if you need
this model without the Digital I/O, then the model number would be NAV4802-S-MR-U
*One more thing!
Because the NAV4802-S-MDR-U has the option to connect the Wall Panel Remote, you should order one or
more of these.
NAVRC-100
080121
Step Number
NAV4802-S-
Example
Example List Price = $1799.95
Example List Price = $169.95
$2,629.80
$299.95
Options in this order!
1
2
M
Example List Price = $499.95
Example List Price = $159.95
List
3
4
5
D
R-
U
© Sabine, Inc.