Network Protocol - Axis 24HUM Administration Manual

AXIS 2400/2401 Administration Manual
Using the Detailed View
Clicking the Detailed View displays the Network Settings dialog which is navigated by clicking
any visible tag. From this dialog you can display, edit and refine the settings for any supported

network protocol.

Note:
Any changes that you make are only implemented when you click the OK button; consequentl y ,
all of the protocols can be safely browsed and edited before deciding to save the settings.
With reference to the on-line help information and the table below, use the Detailed View
manually configure the Network Settings:
TCP/IP Parameters Description
BOOTP Enable the BOOTP protocol for downloading the Internet address automatically. For further
information on using BOOTP see also Using BOOTP in UNIX, on page 16. If you intend to use
the AXIS IP Installer BOOTP must be enabled.
RARP Enable the RARP protocol for downloading the Internet address automatically to the unit. For
further information on using RARP, see also Using BOOTP in UNIX, on page 16.
IP Address Specifies the unique 32-bit IP address of your unit.
Default Router Defines the default router for the AXIS 2400/2401 which by default, is set to automatic router
search. If script applications the default router must be defined.
Subnet Mask Defines the subnet mask for the AXIS 2400/2401. Used for determining when the traffic
should be sent via a router. The default 0.0.0.0 indicates automatic router sensing. If script
applications the subnet mask must be defined.
Bandwidth Default to unlimited, this parameter defines the network bandwidth restriction for the video
server; particularly useful for connection to busy and/or heavily loaded networks.
DNS Parameters Description
Primary DNS Defines the IP address of the primary DNS server. Used for identifying computers with names
instead of IP addresses.
Secondary DNS The IP address of the secondary DNS server. The secondary DNS server will be used in case
the primary DNS server is unavailable or disconnected.
SMTP Parameters Description
SMTP Mail Server Defines the server that is to provide your e-mail facilities.
SMTP Return The reply address for e-mails sent by the AXIS 2400/2401; that is, the name address that is to
Address appear in the 'sent by' field of the dispatched e-mail.
Configuring the Video Server
27
to